Electric Fence 2 Dogs Shock Collars Waterproof Wireless Hidden System

  • Sale
  • $72.53


Read the user's manual carefully before use. The electronic collar is for dogs only. DO NOT test or set up system while the collar is on the dog.
Make sure to replace the batteries when they are low to avoid irregular operation.
Prior to system activation, allow your pet to wear the collar for several days to get used to it and prevent negative association with the collar and the correction system.
The dog should NOT wear the collar for more than 12 hours at a time. Supervise your dog at all times while the correction collar is on. This is especially encouraged for the first few times of using the system.
Includes: 1 Black Indoor wall-mounted transmitter (NOT WATERPROOF. KEEP DRY AT ALL TIMES); 2 Black rechargeable and waterproof collar receivers; 2 Orange waterproof adjustable receiver collar (64cm/ 25inch long approx.); 20 Orange training flags (15 cm/ 6 inch long approx.); 1 Boundary wire (300 meters); 2 Extra metal contact points pack; 2 Test bulbs; 1 Screws pack; 1 User's manual; 1 AC adaptor; 1 Power plug; 2 USB charging cables
Features: Rechargeable and waterproof collar receiver- For the first use, please charge for at least 4 hours, then the red LED light will turn on. When the collar is working, the green light will flash. If the dog does not bark for over 2 minutes, it will turn to the sleep mode and the LED light will turn off. When the dog barks again, the receiver will activate automatically. Low Battery Indicator- The collar receiver will keep beeping for 2 minutes unless it gets charged. Multiple Collar Operation- Add as many collars as you like to contain as many dogs as you have. There is no limit to the number of collars it can control. Please select the number of collars you want when you place an order. Progressive Tone Stimulus- A warning tone will be issued first that lasts for up to 10 seconds. If the dog moves closer to the boundary then a two static shocks. After 20 seconds if the dog does not go back to the safe zone it will receive a warning tone plus static shock. Audio and Visual Wire Break Indicators- Should the buried wire ever break, a loud sonic alarm will sound accompanied by a flashing light; Speed Detect Anti-Run function- The faster your dog is moving, the quicker the higher level of intensity is issued; Built-in Lightning Protection- Protects transmitter from power surges caused by lightning strikes; Up to 5000 square meters range (over 1.2 acres of land)- giving you a more sustainable, inexpensive and safe alternative to costly wood or brick fencing. Underground fencing is a harmless, dependable and pet-friendly way to train your dog to stay within selected zones and away from roads, pools and other potentially harmful areas. It is also an ideal solution to keep pets away from neighbors' gardens and flowerbeds. The in-ground Electric Fence and Collar are easy to install and operate. The wire can be buried around the chosen zone while the collar will fit securely around your dog's neck in the same way as other dog collars. It is strongly recommended that you do not try out the system while the dog is wearing the collar. Additionally, let your pet to wear the collar for some days prior to activating the system. This will guarantee that your pet does not associate the collar with correction. Usage: As your dog reaches the boundary, the collar will make a minor beeping sound, to inform the dog that this area is out-of-bounds. The sound will continue to intensify as the dog moves closer to the fenced area. The system is safe to use, and will not affect the dogs health in anyway. Steadily, your pet will begin to naturally respect safe playing zones, therefore shielding your pet. Key features: Progressive tone stimulus- As the dog reaches the boundary a minor cautionary tone will be heard. If the dog does not change course then a minor shock stimulus will follow after 4-10 seconds. Pulsed proportional stimulus- The shock stimulus will increase as the dog reaches out of bound areas. Please note the stimulus is dog friendly, and will not surpass harmful limits. Variable field width control- You can control the exact width of the signal field. Rotating the filed width knob clockwise on the transmitter will increase the signal filed width, while rotating counter-clockwise will decrease the signal field width. Violation warning- If your pet crosses the wire then an alarm and flashing light will be activated. Motion sensor- The shock intensity will progressively increase with the speed of your dog. Therefore the faster the dog runs, the more intense the warning. Two collars one system- We offer two dog collars with this system, thus enabling two pets to be trained at the same time. Caution: Read the instruction manual carefully before use. The electronic collar is for dogs only. Make sure to replace the batteries when they are low to prevent irregular operation. Before starting the training program, let your pet wear the collar for several days to get used to it, and also to avoid negative association with the collar and the correction system. The dog should NOT wear the collar for more than 12 hours at a time. NEVER test or set up system while the collar is on the dog. Supervise your dog at all times while the correction collar is on. This is especially encouraged for the first few times. TROUBLESHOOTING GUIDELINES A. Dog is not responding to correction: Adjust the collar fit. Trim the dogs hair or use longer probes to make better skin contact. Change the battery in the collar receiver. B. System Test Procedure: Whenever you experience a malfunction, you will need to do a Test Loop to determine which component - collar, wall transmitter, or yard wire - is not working. To perform the Test Loop procedure: 1. Make a test loop using a piece of wire at least 4 meters in length. 2. Remove the existing wire from your wall transmitter. 3. Insert the two ends of the test loop wire into the wall transmitter. 4. Turn the field width knob to a low setting. 5. Place the test light on the collar receiver. With the collar in hand, move outside the field and approach the test loop. Make a mental note of the distance between the collar and the wire when the collar activates. 6. Turn the field width knob to a medium setting. 7. Back away from the wire and approach it again. Determine the distance between the collar and the wire when the collar activates. The distance should be greater on the medium range setting. 8. If more than one collar receiver is used with the system, repeat the above test on each collar. Results of System Test Procedures: If there is no green POWER light on the wall transmitter with the test loop wire in place, the wall transmitter is malfunctioning. As this unit has a protection function, if something causes the system to halt (no green POWER light), please unplug the power of the transmitter. After ten minutes plug the power again, it will work as normal. If the green POWER and OK lights are solid on the wall transmitter, but the collar does not activate on the test loop wire, the collar receiver is not working. Change the battery in the collar receiver and repeat the test. If the red Break light on the transmitter turns on together with beeping sound, the problem is in the yard wire. Package includes: 1 Black Indoor wall-mounted transmitter (NOT WATERPROOF. KEEP DRY AT ALL TIMES) 2 Black Rechargeable and waterproof collar receivers 2 Orange waterproof adjustable receiver collar (64cm/ 25inch long approx.) 20 Orange Training flags (15 cm/ 6 inch long approx.) 1 Boundary wire (300 meters) 2 Extra metal contact points pack 2 Test bulbs 1 Screws pack 1 User's manual. 1 AC adaptor 1 Power plug 2 USB charging Cable

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
Sale

Unavailable

Sold Out