Connect/disconnect in one second keeping things neat and organized! Terminal pins diameter: 0.162 inch / 4.12mm! Replace standard clamp ends on your battery charger to prevent accidental reverse polarity when hooking up a charger and have provisions for mounting so they can be easily secured to a vehicle.
This universal connector is easy to solder to different wires. Compatible with 6, 7, 8, 9, 10 gauge wires with recommended maximum 120 amps current.
Ultralight design with tight weather covers for 100% safety. Combined shell made from polycarbonate- a versatile and tough plastic, makes this connector sturdy and reliable.
Comes with 4 terminal pins made of red copper coated with silver. Features strong electrical conductivity and reduces the resistance to guarantee stable voltage and current. The installation is very simple, however please use a crimping tool to get things done.
Voltage: 12-36 volts DC
Terminal pins diameter: 0.162 inch / 4.12mm
Size: 1-7/8" x 1-3/8" x 1/2"
Capacity: 120 amps
Compatibility: 6, 7, 8, 9, 10 Gauge
A robust and efficient “connect & disconnect” connector kit for a winch, remote battery charger, trailer or other electrical devices. Permitting over 10,000 connect and disconnect actions. It’s made from polycarbonate, a versatile and tough plastic that offers great strength combined with light weight. The bottom of the plug is lined with rubber to protect against dust, moisture and corrosion. The connectors are ideal for 12-36 volts DC low-voltage, and low or medium direct current use. The ends are designed to connect in only one direction, making it impossible to connect the wrong polarities to one another- for increased safety and convenience.
The terminal pins inner diameter is 0.162 inch / 4.12mm and it can accept wires from 6 to 10 gauge.
Installation and operation are very straightforward- simply insert the wires into the terminal pins, then fuse or crimp them (make sure you use a crimping tool and not a hammer). Then insert the terminal pins into the connector housing and lock them in place.
A pair of connectors (2 connector ends, 4 terminal pins, and 2 rubber boot caps).
Questions & Answers
Have a Question?
Be the first to ask a question about this.